Solar Tech Kit

Install the future. Start today.

A complete tool kit for solar panel installers and renewable energy apprentices. Covers PV system installation, electrical testing, rooftop safety, and conduit work. Aligned with NABCEP certification program requirements and real-world solar job sites.

Solar Installation ApprenticesPV System InstallersRenewable Energy TechsElectrical Apprentices

☀

$229

Complete starter kit · Ships nationwide

30 professional-grade tools

Order Kit — $229

Request Bulk Quote (10+ kits) Ask a question

✓ Pro-curated tools ✓ Built by experienced tradespeople

Secure checkout via Stripe

What's in the Kit

Electrical Testing

Digital Multimeter (CAT III 600V)

True RMS. Measures DC voltage, current, and resistance for PV system commissioning.

Clamp Meter (AC/DC)

Non-invasively measures string current and inverter output. 600A DC rated.

Non-Contact Voltage Tester

Detects live conductors safely before handling wires. NABCEP job-site requirement.

Solar PV Analyzer

Tests open-circuit voltage and short-circuit current of individual panels.

Wiring & Connectors

MC4 Crimping Tool

Crimps MC4 connectors onto PV wire. Industry-standard solar connector system.

MC4 Connector Set (20pc pairs)

Male and female MC4 connectors for PV string wiring.

Wire Strippers (10-14 AWG)

Strips PV wire without nicking conductors. Clean strip on USE-2/THWN wire.

Cable Cutter (up to 4 AWG)

Cuts PV cable cleanly. Handles larger gauge combiner box wiring.

Conduit Bender (1/2" EMT)

Bends EMT conduit for DC and AC conduit runs from combiner to inverter.

Fastening & Mounting

Torque Wrench (3/8" Drive, 10-100 ft-lb)

Torques racking hardware to manufacturer specs. Required for roof warranty compliance.

Nut Driver Set (6pc)

1/4" to 1/2" hex. For rail clamps, module frames, and mounting hardware.

Cordless Impact Driver (18V)

Drives lag bolts into roof rafters for standoff mounting.

Drill Bit Set (Masonry/Wood)

Pilot holes for lag screws and wall penetrations.

Spanner Bit (Tamper-Resistant)

Required for some racking systems with anti-theft fasteners.

Roof Safety

Full-Body Safety Harness (ANSI Z359.1)

Required for any roof pitch over 4:12. OSHA-compliant fall arrest harness.

Rope Lanyard (6ft Self-Retracting)

Connects harness to anchor point. Shock-absorbing locking mechanism.

Roof Anchor (Temporary)

Installs under shingles for single-day use. No roof penetration required.

Non-Slip Work Boots

Rubber sole rated for roof work. Protects against slipping on steep pitches.

Hard Hat (Class E)

Electrical-rated hard hat for sites near overhead lines and inverter panels.

Layout & Measurement

Tape Measure (25ft)

Measures roof spans, module spacing, and conduit runs.

Chalk Line (100ft)

Snaps alignment lines for module rows and racking layout on roofs.

Digital Level (24")

Confirms racking is plumb and level before module installation.

Angle Finder

Measures roof pitch for tilt calculations and load design.

Safety & Storage

Insulated Gloves (Class 00, 500V)

Rubber insulating gloves rated to 500V AC. Required for DC live work on PV arrays.

Safety Glasses (Anti-Fog)

ANSI Z87.1. Protects from metal shavings and UV exposure on open-air job sites.

Heavy-Duty Tool Bag (20")

28 pockets with reinforced base. Holds the full kit for multi-story installs.

Solar Tech Kit

What's in the Kit

See what's in the kit — free Solar Tech tool checklist

Check your inbox!

Other Kits

Electrician Kit

Plumber Kit

HVAC Technician Kit

Carpenter Kit

Welder Kit

General Contractor Kit

Maintenance Technician Kit

Painter Kit

Mason Kit

Roofer Kit

Auto Mechanic Kit

Handyman Kit

Landscaper Kit

Heavy Equipment Operator Kit